Any piece of furniture that can stand alone and doesn't need to be assembled from separate parts is referred to as office furniture. Desks, chairs, filing cabinets, tables, lounge furniture, and computer desks are a few examples.

Fabric
The fabrics used in this fabric furniture are mostly soft and comfortable types, which are easy to get dirty and easily damaged, so special attention should be paid to their cleaning during maintenance. For products made of imported fabrics that have been dust-proof and anti-fouling, they can be cleaned by wiping them with a clean wet towel. For those products that are particularly dirty and fragile, it is best to send them to a professional cleaning shop for cleaning, which can prevent deformation and prolong their service life.

Electroplated and sandblasted glass
Office furniture such as electroplating and sandblasting glass are mostly coffee tables, seats, and other products in the staff lounge. The surface of this office furniture is bright, and it is easy to see the fingerprint stains that affect the appearance of the product surface coating. However, this type of product is much easier to maintain than the above three types. Usually, you only need to avoid placing it in a sleeping environment; when cleaning, you only need to gently wipe it with a dry cloth to make it as bright as new.

Solid wood
Solid wood office furniture is mostly office desks, office chairs, etc. When maintaining, pay more attention to cleaning, placement, and movement. When cleaning, avoid scratching with sharps. For stubborn stains, do not use a wire brush or a stiff brush for cleaning. Instead, use a soft cloth dipped in a strong cleaner to wipe. When placing, also pay attention to avoid direct sunlight as much as possible, because it will quickly oxidize the paint on the surface. Also, be careful when moving to avoid bumping and damaging the painted surface.

Genuine leather
Leather office furniture is mostly used in high-level leadership offices to show the taste of the enterprise. It has good softness and color, and it is easy to be damaged if it is not maintained well. In maintenance, you need to pay more attention to the two aspects of placement and cleaning. When placing, like wooden office furniture, you should try to avoid direct sunlight. When cleaning, it should be wiped with a fine flannel cloth dipped in a small amount of water, and then wiped with a soft dry cloth. For stubborn stains, it is best to use

Panel furniture
First of all, the ground on which the panel furniture is placed must be kept flat, and the four legs are balanced on the ground. If the panel furniture is placed in a state of frequent swaying and unstable, the fastening parts will inevitably fall off and the bonding part will crack over time, thereby affecting the use effect and reducing the life of the panel furniture.
Second, it is best to use pure cotton knitted cloth when removing dust from panel furniture and then use a soft wool brush to remove dust from depressions or relief patterns.
Third, the position of panel furniture should not be exposed to direct sunlight. Frequent sunlight will cause the paint film of the furniture to fade, the metal fittings are easy to oxidize and deteriorate, and the wood is easy to become brittle.
Finally, it is necessary to maintain indoor humidity. Do not let panel furniture get wet. The use of humidifiers in the spring and autumn should be limited to prevent damage to furniture due to excessive humidity. Usually, use as little water as possible to clean furniture, and it is necessary to avoid using alkaline water. It is only advisable to wipe it with a damp cloth that has been wrung out of the water, and then wipe it with a dry cloth.

View more: https://www.trade-global.com/office-furniture.html